Useful Information
We are happy to provide useful information and top tips
for Floor Screeding for you
For any technical questions you may have, please contact us
We cannot all be experts in Floor Screeding, so whether it is advice on preparation or which type of screed you require, we are here to help you get your property ready for Underfloor Heating and Insulation.
View our tips below in which we hope it is of some use to you:
View our tips below in which we hope it is of some use to you:
No gaps
Have you got a designated wash out area? An old rubble heap or a skip is ideal.
Wash out area
Have you got a designated wash out area? An old rubble heap or a skip is ideal.
Cleansing
Is the floor clean from any insulation dust, mud etc? This could rise to the top of the screed and prevent a smooth surface finish.
Slip membrane
Do you have a slip membrane tightly fitted on top of your insulation?
Soil stacks
Have you installed a perimeter expansion strip around all internal and external walls and soil stacks? (25mm insulation upstands do not act as expansion strip)
Taped up
Have you used duct tape to tape all polythene joints and perimeter strip? Do not use aluminium/foil tape as this will react with the screed.
Plenty of clips
Are your Underfloor Heating pipes secured?
Pressure
Is your manifold filled and pressure tested?
Know your floor level
Do you know your datum point? – Co-Dunkall Ltd suggest a minimum of 50mm average depth with UFH (thin section screeds are available)
Know your screed
Ensure only plaster based products are used for Anhydrite screeds and only cement based products are used for cementitious screeds.
Avoid frozen pipes
We recommend using anti-freeze at point of installation of your underfloor heating to avoid frozen pipes, which is also a service we offer.
Preparation is key
Make sure you prepare your surface correctly. Remove any laitance before final finishes are installed by sanding your screed correctly.
What screed do I need?
Unsure which type of screed is suitable for your project? This handy table below will help! Alternatively, contact our team to run through the options
Select the table below to expand image and zoom if necessary.
What is Cemfloor?
Cemfloor is a quick-drying, cement based liquid screed and is one of our most popular products. Following on from its list of advantages above, it’s also a product we batch and supply ourselves via our transmix lorry which offers you improved productivity and reliability.
This product is suitable for use with cement-based adhesives, meaning there is no need to purchase extra specialist adhesives as you may have to with anhydrite screeds.
What is Anhydrite Screed?
Anhydrite screed is a pump applied, self-compacting floor levelling solution that can be laid at a much thinner depth than traditional screed methods. Its liquid properties allow for faster install times allowing for increased productivity on site. There are a wide variety of anhydrite screeds to choose from, including high strength and high thermal efficiency.